Premier Equine Cold water Compression boots

Advanced, medical-grade fabrics have been used to engineer this innovative cold
water compression boot.


The practical solution for leg cooling after strenuous exercise. Simply soak in
water for 5-8 minutes (maximum 30 minutes*), no need for ice or refrigeration.

A revolution in cooling technology aided recovery activated by moisture
absorption and maintained by exposure to airflow delivered via the 3D ducted
mesh. The advanced cold water fabric has been developed as part of our Air Tech
range, the lining is of medical-grade providing hypo-allergenic and
antibacterial properties. The material uses a unique chemistry to achieve rapid
water absorption. The advanced formulation releases energy over time to provide
temperatures that are 6-12° cooler than ambient temperature.

The boot has been engineered to provide uniform cooling without restricting
movement. The air is the element that keeps the fabric cool once it has been
activated by water. The 3D sports mesh outer allows a constant flow of air to
reach the cold water material which prolongs the cooling effect of the boots.
Once saturated the cold water fabric is activated and provides a cold cushioned
layer anatomically shaped to your horse’s leg. The adjustable Velcro straps
create compression to further aid recovery.

Our Air Tech specialist fabrics have been developed for all equine disciplines
to ensure key properties facilitate the technical performance and protection
required of our products.

Recommendations

We recommend using the boots for no longer than 2-4 hours per use. Boots can be
worn in the stable or during turnout.

Legs should be clean before applying the boots. We recommend soaking in cold
water for 5-8 minutes before applying to the leg. Gently squeeze out excess
water. Under no circumstances should the boot be applied in its dry state.

Water of an ambient temperature may also be used as the fabric technology will
lower the temperature.

*Do not leave to soak excessively – maximum 30 minutes.

Store in an airtight box or bag once dry for optimum wear.

If the boots go to body temperature, simply add cold water to reactivate. The
boot can be in use during re-activation (left on the leg). Ensure dry spots are
checked for at regular intervals – particularly on hot days.

High humidity (90%) will diminish the fabrics ability for the product to provide
cooling.

WARNING

Boots must be soaked in cold water for 5-8 minutes (maximum 30 minutes*), before
use ensuring thorough saturation.

It is important to keep the boot saturated during use.



-Advanced water absorption technology provides cooling
-Soak in water for 5-8 minutes to activate (maximum 30 minutes*). No need for
refrigeration
-Anatomically shaped
-Medical-grade cold water fabric
-Hypoallergenic and antibacterial
-3D ducted sports mesh for air circulation
-Injury prevention
-Aids tissue recovery after strenuous exercise
-Easy wrap-around design
-Helps reduce swelling
-Secure Velcro fastening creates compression with silicone grip ends for ease of
fitting
-Sold in pairs
-Suitable for use in the stable & during turnout for 2-4 hours per use